TC 100 IF DM3

The new TC 100 IF DM3 is a single phase industrial vacuum, designed to respond to the requirements of mechanical and engineering industries for an oil and chips vacuum being at the same time powerful, compact, competitively priced and almost maintenance free. By fulfilling all these requirements, this model is widely appreciated and employed in both small and large industries.


  • One single machine to vacuum, separate and recover or dispose the cutting oil mixed with metal chips
  • Powerful suction thanks to three by-pass motors
  • Compact and maneuverable, perfect for use in narrow spaces
  • 100% steel construction
  • Liquids level control thanks to the floating to stop the suction, and visual level detector
  • Detachable container with integrated sieve basket, for separation of metal chips
  • Fast discharge system of the collected liquids (reversed airflow system, 100lt/ min)
  • Tangential suction inlet and cyclone for filter and motor protection
  • Oil mist and nebulized particles separation system, thanks to the Superweb 3D  double layer polypropylene filter
  • Specific oil proof wheels and gaskets


Voltage¹ V - Hz 230 - 60 1ph
Power HP (kW) 4.6 (3.4)
Electrical protection IP
Max waterlift inH2O (mmH2O) 98 (2500)
Max air flow CFM (m3/h) 318 (540)
Suction inlet in (mm) 2 (50)
Liquids capacity gal. (lt.) 26 (100)
Solids capacity gal. (lt.) 10.6 (40)
Noise level (EN ISO 3744) dB(A) 76
Dimensions in (cm) WxLxH 33x26x49 (84x66x125)
Weight lb (kg) 154 (70)
Oil mist filter
Diameter in (mm) 3D Superweb
Media, filtration 19.7 (500)
Optional: Oil&Water proof cartridge
Surface, diameter ft2 (m2) 20.7 (1.9)