DG KW3 D2
The DG KW3 D2 is NRTL certified for Class II, Division 2, Groups F & G. Powerful side channel blower, manual cleaning system, and high suction pressure; these are just some of the reasons why the DG KW3 D2 industrial vacuum system is not just a simple industrial vacuum, but a veritable tool for handling or removing large amounts of material. This vacuum can increase the efficiency and productivity of any heavy industry. Best when used in a centralized vacuum system in combination with Delfin’s filtering and separating units.
For more innovations associated with this model, see “related products” section below.
Tech Data Sheet
Product Brochure
Technical Data | DG KW3 D2 | |
---|---|---|
Voltage | V - Hz | 460 - 60 3~ |
Power | HP (kW) | 4.6 (3.5) |
Electrical Protection | IP Class | 55 |
Continuous Water Lift | inH20 (mmH2O) | 92.3 (2345) |
Max Airflow | CFM (m³/h) | 220.7 (375) |
Suction Inlet | in. (mm) | 3 (80) |
Noise Level (EN ISO 3744) | dB(A) | 72 |
Capacity | Gal. (L) | 26 (100) |
Dimensions (WxLxH) | in. (cm) | 26x47x57 (66x119x145) |
Weight | lb. (kg) | 276 (125) |
Primary Filter Type | Star | |
Material - Efficiency | IEC 60335-2-69 | Antistatic Polyester - Class M |
Filter Surface Area | ft² (m²) | 32 (3) |
Air load on filter | ft/min (m/h) | 6.9 (126.1) |
Cleaning system | Manual |